VESPA REAR C/BAR
1. Loosen Off Rear Stand Bolts, Fit Pillion Foot Bar Slotted Holes To Loose Stand Bolts (Do Not Fully Tighten)
2. Fit Rear Support Bar To Number Plate Holder (Do Not Fully Tighten)
3. Fit Front Of Crash Bar Into End Of Pillion Foot Rest Bar Tighten Bolt (Do Not Fully Tighten)
4. Finally Attach End Of Crash Bar To Rear Support Bar With Fixings Supplied. Line Up Crash Bar Then Tighten Up All Fixings
