A QUICK GUIDE TO FITTING LUCAS PATHFINDERS

1.MEASURE DOWN FROM TOP OF LEG SHIELD 300mm
MAKE FAINT MARK WITH PENCIL

2.MEASURE ACROSS FROM EDGE OF HORN CAST 95mm
MAKE MARK WITH PENCIL

3.PLACE PATHFINDER MOUNT ON LEG SHIELD AND SCRIBE AROUND THE OUTER EDGE WITH PENCIL

2.

4.WHEN YOU HAVE POSITIONED MOUNTING POINTS
CENTRE PUNCH THE TWO HOLES READY FOR DRILLING

5.DRILL 5mm PILOT HOLE THEN 8mm AND THEN 11.5mm DRILL BIT

6.DISMANTLE LUCAS LAMP (1 SCREW AT BOTTOM OF LENS)

7.PLACE PATHFINDER & MOUNT IN POSITION. HOLD IN PLACE & TIGHTEN MAIN FIXING NUT

8.NOW BOTH LAMPS ARE IN POSITION (CHECK YOU ARE HAPPY WITH THE WAY THEY ARE SITTING)

9.REPLACE THE LENS BACK INTO PLACE.

10.YOUR DONE!